Photometer ATI Model TDA 2i
. Hepa Filter Testing ISO 14644-3.
. Lightweight, portable and rugged digital photometer
Large.
. 4.3″ LCD screen to display critical information.
. iProbe (optional) with 12 ft cable for hard to reach areas minimizes downtime.
. User settable aerosol noise suppression for more stable aerosol measurements.
. Printer (optional) available for reporting.
Product Specifications
Dimension (L x W x H): 25.7 cm x 33 cm x 15.2 cm (13 in. x 10.1 in. x 6 in.)
Weight: 8.6 kg (19 lb)
Power:
Output Voltage: 100 to 250 Volts AC, 50/60Hz automatic adjustment
Input Voltage: 0.5 amps @ 120V, 0.25 amps @ 240V
Auto Zero: Automatically establishes zero reading at startup
Alarm: User selectable audible, visual, and vibratory
alarms notify the user when the user defined set
point is exceeded
Flow Control: Pulse Width Modulation (PWM) control ensures
sampling rate of 1cfm (28.3 lpm) +/- 10% in all
applications
Reagent Settings: PAO-4, DOP, Ondina, PEG, Krydol, Corn Oil, Mineral Oil, Paraffin
Dynamic Range: 0.0001 mg/m3 to 120 mg/m3
Sensitivity: 1% of readings > 0.01% to 100%
Repeatability: 0.5% of readings > 0.01% to 100%
Light Source: Solid State, rated for life of instrument
Output: USB Connection
Reporting: Continuous, Summary, and Monitoring modes
Standards Compliance:
Industry: NSF 49, IEST, ISO 14644-3
Electrical & Safety: CE, FCC, EN 61010-1:2010, EN 61326-1:2006
Applications :
. Biosafety Cabinets & Fume Hoods
. Hospital operating theatres
. Nuclear Facilities
. HVAC qualification companies
. Filter Manufacturers
. Medical Facilities & Cleanrooms
Accessories
. Thermal Printer 2i photometer.
. Transport case.
. iProbe.
Services
. Equipment rental: available within 48 hours (depending availibilty). Full package including accessories, calibration certificate and consumable.
. Training session on site or in our office related to regulation, equipment use and data treatment .
. Calibration and metrological services are performed in our laboratory located at Betton (35).
You may also like…
-
Laskin Nozzle Generator ATI Model TDA 6D
. Airflow rates from 350 – 3500 m3/hr for a wide range of testing requirements.
. Flex-fuel capabilities, allows for the use of different reagents.
. Rugged Portability.
. Safe and reliable Operation.
. Built-in compressor.
. Easy operation for testing of Microbiological Safety Cabinets.
. Lightweight and rugged, ideal for remote locations. -
Positive Injection Pump
. Provides the force needed to inject aerosol into positively-pressured ducts.
. Cleanroom Certification.
. Aerosol is available up to 20 meters (65 feet) from the PIP for hard to reach places.
. Available speed control allows precise control of the sparge pipe aerosol curtain.
. Easily connect to Sparge Pipes or Aerosol Splitters.
. 50m3/hr @ 50mbar. -
Thermal Aerosol Generator ATI Model TDA 5D
. Hepa Filter Testing ISO 14644-3.
. Fast operation with a warm-up time of only 60 seconds.
. Widest range of System Flow Rates 850 – 120.000 m3/hr.
. Rugged Portability.
. Safe and reliable Operation.
. Flex-Fuel Capacity.
. Lightweight and rugged, ideal for remote locations.
Related products
-
Smoke generator MICRORITE
- . Visualization and monitoring of airflow (ISO 14644-3 Annex B7) in classified environments.
- . Pressure balancing between rooms (visual indication).
- . Optimization of equipment location.
- . Discovery of unsuspected sources of particulate and gaseous contamination.
- . Monitoring air infiltration paths to minimize the introduction of particles into critical areas.
-
Air Velocity Meters VELOCICALC TSI Model 9515
. The Model 9515 is an economical choice for a digital air velocity meter, without compromising accuracy or precision.
. Professionals find them to be the ideal tool for face velocity measurements in fume hoods, spray booths, or ventilation system checks.
