Aerosol Diluter ATI – TDA D10 / TDA D100

. Compatible with any 1 cfm particle counter.
. Minimizes pressure drops and aerosol loss.
. Available in 10:1 and 100:1 dilution ratio configurations.
. Can be plumbed in series for alternate dilution configurations.
. Ideal for isolators, mask fittings and installation with low airflows.
. Works with any type of aerosol challenge, including PSL, PAO, DOP, and NaCl.

Download product sheet

SKU: 285fa97a7b44 Categories: Accessories for Generators, ATI, Cleanroom qualifications, Filter integrity test, Portable photometer and aerosol generators

Need information

Share Product

Click here

Product Specifications
Associated services

Product Specifications

Dilutes aerosol to measurable levels for particle counters.
Installed between the aerosol source and a particle counter, diluters minimize pressure drop and aerosol loss while preventing saturation of the particle counter.

Dilution Ratio: D10 – 10:1 | D100 – 100:1

Particle Size of Interest: 0.1, 0.3 or 0.5 micron

Air Flow Rate: 1 cfm (28.3 lpm)

Pressure Drop: Nominally ≤ 1 in. Water Column (25 mm WC)

Electrical: Not required

Run Time Meter: Included

Material: Stainless Steel

Operational Inlet / Outlet: 0.325 in. Tubing ID | 0.25 in. Tubing ID Optional

Size: 15.5 cm x 8.3 cm x 55.9 cm (6.5 in. x 3.3 in. x 22.0 in.)
Weight: 3.0 kg (7.0 lb)
Maintenance: Replace internal bypass filters as necessary. Ultrasonic cleaning of annular orifice. Clean or replace tubing as required.

* Note: Flow rate and particle size of interest can be configured to customer requirements

Application:
Pharmaceutical manufacturers.
Medical facilities and cleanrooms.

Associated services

. Training in the use of the device, remotely or on site, and in the use of the data.

. Performance of metrological verification services in our laboratory located in Betton (35).